Hello,
I have a Latitude D630C with Intel Core 2 Duo @ 2.0 GHz processor, 120 GB HDD, 2.0 GB RAM, Quadro NVS 135m
Graphics, Windows 7 Ultimate I bought on Ebay last month. First problem was computer booted up but no display on the LCD.
It was suggested I replace the LCD display, which I did. I now have a display on the LCD but I have a split display. Two horizontal displays and each horizontal display has a vertical line that separates each horizontal display into left and right. The right side is almost normal in color but the left side is a mix of green, purple, red, white, with alot of lines. The icons are somewhat visible but are stretched out horizontally. I can barely make out anything on the left side.
This is the same for both the upper and lower display. I have the Dell logo as the desktop image and the right side I can make out the two L's and the background is blackish, it's not great but it's alot better than the left side.
There is a 1.5 inch vertical black stripe that runs the entire right side of the display. There is a 1 inch vertical black stripe that runs the entire left side of the display.
Everything works on the computer as before, I just now have two horizontal displays that are split into a bad left
side and a hot so bad right side.
I have run the LCD built in self test, get grey, red, blue, green and white screens, all colors were bright and vibrant on the LCD.
I have run the diagnostics (Fn key and start up), Caps Lock flashing, Num Lock and Scroll Lock off.
External monitor works and there is NO split display. Dell desktop screen initially has blue and black vertical stripes, after a couple of minutes the Dell desktop screen has light pink vertical stripes. Windows Internet Explorer menu bar has light blue and pink vertical stripes and internet images have light blue and pink vertical stripes.
In Device Manager, Monitor is shown
as Generic PNP Monitor, Device is working properly, Driver Date is 6/21/2006,
Driver Version is 6.1.7600.16385.
In Device Manager, Display Adapter is
shown as Standard VGA Graphics Adapter, Device is working properly, Driver Date
is 6/21/2006, Driver Version is 6.1.7600.16385.
BIOS Version/Date is Dell Inc A09,
12/24/2008
In the BIOS screen:
System Info screen:
System=Latitude
D630C
BIOS Version=A09
(12/24/2008)
Service Tag= <ADMIN
NOTE: Service tag removed per privacy policy>
Asset Tag=BOOT
Ownership Tag=VGA
Processor Info
screen:
Processor
Type=Intel (R) Core 2 Duo @ 2.0 GHz processor
Processor ID=06F5
Current Clock
Speed=2.00 GHz
Minimum Clock
Speed=1.20 GHz
Maximum Clock
Speed=2.00 GHz
Processor Cache
Size=4096 KB
Dual Core
Present=Yes
Memory Info screen:
Memory
Installed=2048 MB
Memory
Available=2013 MB
Memory Channel
Mode=Dual
Memory
Technology=DDR2 SDRAM
Device Info screen:
Primary Hard
Drive=120 GB HDD
Modular Bay
Device=CD-RW/DVD Combo
Video
Controller=Quadro NVS 135M
Video BIOS
Version=060.086.047.000.009.000
Video Memory=128 MB
Panel Type=14"
Wide XGA+
Native
Resolution=1440 by 900
Boot Sequence
screen:
1.Diskette Drive
2.Internal HDD
3.USB Storage
Device
4.CD/DVD/CD-RW Drive
In Device Manager,
Monitor is shown as Generic PNP Monitor, Device is working properly, Driver
Date is 6/21/2006, Driver Version is 6.1.7600.16385.
In Device Manager,
Display Adapter is shown as Standard VGA Graphics Adapter, Device is working
properly, Driver Date is 6/21/2006, Driver Version is 6.1.7600.16385.
Thanks for your help.